Walk-around SK300LC-10 video
Kobelco’s expert is sharing the values of SK300LC-10; Durability, outstanding Quality and Reliability, ultimate Operator Comfort.
Power meets Performance!
Generation 10 video
Generation 10 machinery is testament to our technical ability and commitment to success! The Generation 10, offers an impressive 10 % reduction in fuel consumption in s-mode. This efficiency improvement is further enhanced by 7% increase in digging volume while operating in H-mode (Heavy Mode) at the same fuel consumption.
OVERVIEW |
|
Model Name | SK300LC-10 |
Machine Type |
SK300LC-10
|
STD Bucket Capacity | 0.75-1.875 cu.yd 0.57-1.43 m3 |
Engine | 252 hp 188 kW / 2,100rpm (SAE NET) rpm |
Operating Weight | 68,100 lbs 30,900 kg |
DIMENSIONS
Unit: ft-in {mm} | ||||
Arm length | Standard 10’2″ {3.1 m} |
Long 13’1″ {4.00 m} |
||
---|---|---|---|---|
A | Overall length | 35’2″ {10,710} | 35’4″ {10,770} | |
B | Overall height (to top of boom) |
10’6″ {3,200} | 11’3″ {3,430} | |
C | Overall width | 11’1″ {3,390} | ||
D | Overall height (to top of cab) |
10’6″ {3,210} | ||
E | Ground clearance of rear end* | 3’11” {1,200} | ||
F | Ground clearance* | 1’8″ {510} | ||
G | Tail swing radius | 10’10″” {3,300} | ||
G’ | Distance from center of seing to rear end | 10’9″ {3,270} | ||
H | Tumble distance | 13’1″ {4,000} | ||
I | Overall length of crawler | 15’12” {4,870} | ||
J | Track gauge | 8’6″ {2,590} | ||
K | Shoe width | 2’7″ {800} | ||
L | Overall width of upperstructure (With Catwalk / Without Catwalk) |
10’3″ {3,120} | ||
* Without including height of shoe lug |
MAIN SPECIFICATIONS
Model Name | SK300LC-10 | |||
---|---|---|---|---|
Machine Type | SK300LC-10 | |||
Operating Weight lbs {kg} | 68,100lbs {30,900 kg} | |||
Engine | Model | HINO J08E-UV | ||
Type | Direct injection, water-cooled, 4-cycle diesel engine with turbocharger, intercooler (Complies with EU (NRMM) Stage IIIB, EPA Tier IV, and act on regulation, etc. of emission from non- road special motor vehicles (Japan)) | |||
Rated power output | 252hp{188kW} /2,100rpm (SAE NET) 268hp {200kW} /2,100rpm (Without fan) |
|||
Fuel tank | 132.9 U.S.gal {503L} | |||
Swing System | Swing Speed | 10.3rpm {10.3min-1} | ||
Travel System | Travel motors | 2 × Axial piston , two speed motors | ||
Travel shoes | 50 each side | |||
Travel speed | 3.2/1.9 mph{5.2 / 3.1km/h} | |||
Drawbar pulling force | 62,900lbs {280kN}(SAE J 1309) | |||
Gradeability | 70%{35deg} | |||
Hydraulic System | Pump Type | Two variable displacement pumps + 1 gear pump | ||
Max.discharge flow | 2 × 65.0 U.S.gpm {2 × 246L/min} 1 x 5.5 U.S.gpm {1 x 21 L/min} |
|||
Hydraulic oil tank | 64.7U.S.gal {245L} tank oil level 108.3U.S.gal {410L} hydraulic system |
WORKING RANGES
Unit: ft-in {mm} | ||||
Boom | 20’4″ {6.20m} | |||
---|---|---|---|---|
Range/Arm | Standard 10’20” {3.10 m} |
Long 13’1″ {4.00 m} |
||
A | Max. digging reach | 35’8″ {10,870} | 38’5″{11,720} | |
B | Max. digging reach at ground level | 35’0″ {10,680} | 37’10″{11,540} | |
C | Max. digging depth | 23’7″ {7,200} | 26’7″{8,100} | |
D | Max. digging height | 32’10” {10,010} | 34’3″{10,430}} | |
E | Max. dumping clearance | 23’4″ {7,110} | 24’9″{7,530} | |
F | Min. dumping clearance | 8’5″ {2,560} | 5’6″{1,660} | |
G | Max. vertical wall digging depth |
20’5″ {6,230} | 23’3″{7080} | |
H | Min. swing radius | 14’6″ {4,430} | 14’11″{4550} | |
I | Horizontal digging stroke at ground level | 18’4″ {5,580} | 23’3″{7100} | |
J | Digging depth for 8 feet flat bottom | 23’1″{7,040} | 26’2″{7970} | |
H | Bucket capacity SAE heaped cu.yd.{m3} |
1.57 {1.20} | 1.57 {1.20} |
DIGGING FORCE
Unit: lbs {kN} | ||||
Boom length | 20’4″ {6.20 m} | |||
---|---|---|---|---|
Range/Arm | 10’2″ {3.10 m} | 13’1″ {4.00 m} | ||
Bucket digging force | SAE | 37,300 {166} (41,100 {183}) |
37,300 {166} (41,100 {183}) |
|
ISO | 42,300 {188} (46,800 {208}) |
42,300 {188} (46,800 {208}) |
||
Arm crowding force | SAE | 27,400 {122} (30,100 {134}) |
22,700 {101} (25,200 {112}) |
|
ISO | 28,300 {126} (31,200 {139}) |
23,600 {105} (25,900 {115}) |
||
* Power Boost engaged |