Polaris Atv Service Manual Ranger And Ranger Tm 2X4 4X4 6X6 Download (PS003020)

Polaris Atv Service Manual Ranger And Ranger Tm 2X4 4X4 6X6 Download (PS003020)

• This manual presented for you in electronic format you can just print out the page you need then dispose of it when you have completed your task. This manual has detailed illustrations as well as step by step written instructions with the necessary diagrams or pictures. These manuals are your number one source for repair and service information, specifically written for the do-it-yourself as well as the experienced mechanics worldwide used to use this factory manual to fix your vehicle. Using this repair manual is an inexpensive way to keep your car working properly. it is this level of detail, along with illustrations, that guide the reader through each service, repairs, maintenance procedure.
• This is the COMPLETE official full factory service repair manual from POLARIS for the RANGER AND RANGER TM. Production model years 2004 2005 2006 2007 2008 2009.

  Over 400 pages allow you to print it out in its entirety or just the pages you need!!

  These manuals are your number one source for repair and service information. They are specifically written for the do-it-yourselfer as well as the experienced mechanic. Using this repair manual is an inexpensive way to keep your equipment working properly. Each manual provides step-by-step instructions based on the complete disassembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure.

  * Detailed substeps expand on repair procedure information
  
  * Notes, cautions and warnings throughout each chapter pinpoint critical information.
  
  * Numbered instructions guide you through every repair procedure step by step.
  
  * Bold figure number help you quickly match illustrations with instructions.
  
  * Detailed illustrations, drawings and photos guide you through every procedure.
  
  * Enlarged inset helps you identify and examine parts in detail.
  
  * Numbered table of contents easy to use so that you can find the information you need fast.
  
  * This manual also makes it easy to diagnose and repair problems with your machines electrical system. Troubleshooting and electrical service procedures are combined with detailed wiring diagrams for ease of use.

  Complete download comes in pdf format which can work under all PC based windows operating system and Mac also. It saves to your hard-drive and can be burned to CD-ROM. All pages are printable. No need to pay for shipping and wait for the overpriced paper textbook or CD-ROM to arrive via snail mail.

  DOWNLOAD IT NOW!!

  RELATED ATV SERVICE MANUAL SEARCHES:

  FRAME/BODY PANELS/EXHAUST SYSTEM TROUBLESHOOTING

  Excessive exhaust noise

  * Deformed exhaust system
  
  * Exhaust gas leaks

  Poor performance

  * Clogged muffler
  
  * Broken exhaust system
  
  * Exhaust gas leaks

  LUBRICATION SYSTEM TROUBLESHOOTING

  Oil level too low – high oil consumption

  * Oil consumption
  
  * External oil leak
  
  * Worn piston rings or incorrect piston ring installation
  
  * Worn cylinder
  
  * Worn valve guide or stem seals
  
  * Oil pump worn or damaged

  Oil contamination

  * Oil or filter not changed often enough
  
  * Worn piston rings or incorrect piston ring installation
  
  * Worn valve guide or stem seals

  FUEL SYSTEM TROUBLESHOOTING

  Engine cranks but wont start

  * No fuel in tank
  
  * No fuel to carburetor
  
  * Clogged fuel strainer
  
  * Clogged fuel line
  
  * Clogged fuel tank breather tube
  
  * Misadjusted fuel level
  
  * Too much fuel getting to the engine
  
  * Clogged air cleaner
  
  * Flooded carburetor
  
  * Intake air leak
  
  * Contaminated/deteriorated fuel
  
  * Clogged jets
  
  * Clogged starting enrichment valve circuit
  
  * Improper starting enrichment valve operation
  
  * Improper throttle operation
  
  * No spark at plug (faulty ignition system)

  Lean mixture

  * Clogged fuel jets
  
  * Faulty float valve
  
  * Float level too low
  
  * Restricted fuel line
  
  * Clogged carburetor air vent tube
  
  * Restricted fuel tank breather tube
  
  * Intake air leak
  
  * Faulty vacuum piston
  
  * Faulty throttle valve

  Rich mixture

  * Starting enrichment valve open (ON)
  
  * Clogged air jets
  
  * Faulty float valve
  
  * Float level too high
  
  * Dirty air cleaner
  
  * Worn jet needle or needle jet
  
  * Faulty vacuum piston

  Engine stalls, hard to start, rough idling

  * Restricted fuel line
  
  * Fuel mixture too lean/rich
  
  * Contaminated/deteriorated fuel
  
  * Clogged jets
  
  * Intake air leak
  
  * Misadjusted idle speed
  
  * Misadjusted pilot screw
  
  * Misadjusted float level
  
  * Restricted fuel tank breather tube
  
  * Clogged air cleaner
  
  * Clogged slow circuit
  
  * Clogged starting enrichment valve circuit
  
  * Faulty ignition system

  Afterburn when engine braking is used

  * Leanmixture in slow circuit
  
  * Faulty air cut-off valve
  
  * Faulty ignition system

  Backfiring or misfiring during acceleration

  * Leanmixture
  
  * Faulty ignition system

  Poor performance (driveability) and poor fuel economy

  * Clogged fuel system
  
  * Faulty ignition system

  CYLINDER HEAD/VALVE TROUBLESHOOTING

  Engine top-end problems usually affect engine performance. These can be diagnosed by a compression test, or by tracing top-end noise with a sounding rod or stethoscope. If the performance is poor at low speeds, check for a white smoke in the crankcase breather tube. If the tube is smoky, check for seized piston ring

  Compression too low, hard starting or poor performance at low speed

  Valves

  Incorrect valve adjustment
  
  Burned or bent valves
  
  Incorrect valve timing
  
  Broken valve spring
  
  Uneven valve seating
  
  Valve stuck open

  Cylinder head

  Leaking or damaged cylinder head gasket
  
  Warped or cracked cylinder head
  
  Loose spark plug

  Compression too high

  Excessive carbon build-up on piston head or
  
  combustion chamber
  
  Worn or damaged decompressor system

  Excessive smoke

  Worn valve stem or valve guide
  
  Damaged stemseal
  
  Cylinder/piston problem

  Excessive noise

  Incorrect valve clearance
  
  Sticking valve or broken valve spring
  
  Excessive worn valve seat
  
  Worn or damaged camshaft
  
  Worn rocker arm and/or shaft
  
  Worn rocker arm follower or valve stem end
  
  Worn or damaged push rod and/or cam follower
  
  Worn cam chain
  
  Worn or damaged cam chain tensioner
  
  Worn cam sprocket teeth
  
  Cylinder/piston problem

  Rough idle

  Low cylinder compression

  CYLINDER/PISTON TROUBLESHOOTING

  Compression too low, hard starting or poor performance at low speed

  * Leaking cylinder head gasket
  
  * Worn, stuck or broken piston ring
  
  * Worn or damaged cylinder and piston
  
  * Bent connecting rod

  Compression too high, overheating or knocking

  * Excessive carbon built-up on piston head or combustion chamber

  Excessive smoke

  * Worn cylinder, piston or piston rings
  
  * Improper installation of piston rings
  
  * Scored or scratched piston or cylinder wall

  Abnormal noise

  * Worn piston pin or piston pin hole
  
  * Worn connecting rod small end
  
  * Worn cylinder, piston or piston rings

  CLUTCH/GEARSHIFT LINKAGE TROUBLESHOOTING

  Clutch slips when accelerating

  * Incorrect clutch adjustment
  
  * Worn clutch discs
  
  * Weak clutch springs
  
  * Faulty clutch lifter
  
  * Improper oil viscosity or oil additive used

  Clutch will not disengage

  * Faulty clutch lifter
  
  * Warped clutch plates

  The vehicle creeps

  * Faulty centrifugal clutch

  Clutch operating feels rough

  * Worn clutch outer and center grooves
  
  * Warped clutch plates
  
  * Loose clutch lock nut
  
  * Faulty clutch lifter
  
  * Improper oil viscosity or oil level

  Hard to shift

  * Incorrect clutch adjustment
  
  * Worn or damaged gearshift cam and stopper arm
  
  * Faulty clutch lifter
  
  * Improper engine oil viscosity
  
  * Bent fork shaft and gearshift spindle or damaged shift forks and shift drum

  Transmission jumps out of gear

  * Broken shift drum stopper arm
  
  * Weak or broken shift linkage return springs
  
  * Worn or damaged gearshift cam
  
  * Bent fork shaft or worn shift forks and shift drum
  
  * Worn gear dogs or slots

  ALTERNATOR/STARTER CLUTCH TROUBLESHOOTING

  Starter motor turns, but engine does not turn

  * Faulty starter clutch
  
  * Damaged starter reduction gear

  CRANKCASE/TRANSMISSION/CRANKSHAFT TROUBLESHOOTING

  Excessive engine noise

  * Worn, seized or chipped transmission gears
  
  * Worn transmission bearings
  
  * Worn or damaged connecting rod bearing
  
  * Worn crankshaftmain journal bearing
  
  * Worn connecting rod small end
  
  * Worn balancer bearing
  
  * Improper balancer installation

  Transmission jumps out of gear

  * Worn gear dogs or dog holes
  
  * Worn shift drum guide groove
  
  * Worn shift fork guide pin
  
  * Worn gear shifter groove
  
  * Worn shift fork
  
  * Bent shift fork shaft

  Hard to shift

  * Damaged shift fork
  
  * Bent shift fork shaft
  
  * Damaged shift fork guide pin
  
  * Damaged shift drum guide groove

  Abnormal vibration

  * Improper balancer timing

  FRONT WHEEL/SUSPENSION/STEERING TROUBLESHOOTING

  Hard steering

  * Steering shaft holder too tight
  
  * Damaged steering shaft bearing/bushing
  
  * Insufficient tire pressure

  Steers one side or does not track straight

  * Incorrect wheel alignment
  
  * Unequal tire pressure
  
  * Bent tie-rod, suspension arm or frame
  
  * Worn or damaged knuckle bearing or brake drum bearing
  
  * Weak shock absorber

  Front wheel wobbling

  * Bent rim
  
  * Worn or damaged knuckle bearing or brake drum bearing
  
  * Faulty tire
  
  * Axle nut not tightened properly

  Soft suspension

  * Weak shock absorber spring
  
  * Faulty shock absorber damper

  Hard suspension

  * Bent shock absorber damper rod
  
  * Improperly installed suspension arms
  
  * Faulty suspension arm bushings

  Front suspension noise

  * Loose front suspension fasteners
  
  * Damaged suspension components

  REAR WHEEL/SUSPENSION TROUBLESHOOTING

  Rear wheel wobbling

  * Bent rim
  
  * Worn or damaged rear axle bearings
  
  * Faulty rear tire
  
  * Axle fastener not tightened properly
  
  * Faulty swingarm pivot bearings

  Rear wheel turns hard

  * Faulty rear axle bearings
  
  * Bent rear axle
  
  * Rear brake drag

  Soft suspension

  * Weak shock absorber spring
  
  * Oil leakage fromdamper unit

  Hard suspension

  * Damaged rear suspension pivot bearing or bushing
  
  * Damaged swingarm pivot bearing
  
  * Improperly tightened swingarm pivot

  Rear suspension noise

  * Faulty rear shock absorber
  
  * Loose rear suspension fasteners
  
  * Worn rear suspension pivot bearing or bushing

  BRAKE SYSTEM TROUBLE SHOOTING

  Front wheel wobbling and noise

  * Worn brake shoes

  Poor brake performance

  * Brake not adjusted properly
  
  * Worn brake shoes and drum
  
  * Water in brake drum
  
  * Contaminated brake shoes and drum
  
  * Air in hydraulic system
  
  * Leaking hydraulic system
  
  * Clogged/restricted fluid passage
  
  * Incorrectly installed rear brake arm
  
  * Worn rear brake cam

  FRONT DRIVING MECHANISM TROUBLE SHOOTING

  Consistent noise during cruising

  * Oil level too low
  
  * Foreignmatter contaminating gear oil
  
  * Worn or damaged bearing
  
  * Worn or damaged ring gear and pinion gear
  
  * Deformed ring gear or differential case
  
  * Improper tooth contact between ring gear and pinion gear

  Gear noises while running

  * Oil level too low
  
  * Foreignmatter contaminating gear oil
  
  * Chipped or damaged gears
  
  * Improper tooth contact between ring gear and pinion gear

  Gear noises while coasting

  * Damage or chipped gears

  Abnormal noises when turning

  * Worn or damaged ring gear bearing
  
  * Worn or damaged face cam and cam follower
  
  * Worn or damaged differential housing groove
  
  * Worn cone spring or shim

  Abnormal noises at start or during acceleration

  * Excessive backlash between ring gear and pinion gear
  
  * Worn differential splines
  
  * Loose fasteners
  
  * Worn cone spring or shim

  Oil leak

  * Oil level too high
  
  * Clogged breather
  
  * Damaged seals
  
  * Loose case cover bolt

  Over heating

  * Oil level too low
  
  * Insufficient backlash between ring gear and pinion gear

  REAR DRIVING MECHANISM TROUBLE SHOOTING

  Excessive noise

  * Worn or scored ring gear shaft and axle
  
  * Worn or scored pinion and splines
  
  * Worn pinion and ring gears
  
  * Excessive backlash between pinion and ring gears
  
  * Oil level too low

  Wobble or vibration in vehicle

  * Axle not tightened properly
  
  * Bent axle

  Oil leak

  * Oil level too high
  
  * Clogged breather
  
  * Damaged seals
  
  * Loose case cover bolt